Filter
Top Products
NSP 100
Names and Functions of Parts
7
ON/OFF (third switch from left): Enable (ON) or
disable (OFF) the remote controller.
1/2 (rightmost switch): When using two NSP-100
units, to select the unit that responds to the remote
controller, set different remote controller codes for
them.
For details, see “Preparations” (page 9).
Remote Controller
Note
Using the remote controller to control the NSP-100
requires settings of both the NSP-100 rear panel DIP
switches and the remote controller.
For details, see “Preparations” (page 9).
1 DISPLAY button
During movie/still playback: Pressing this button
displays the title of the movie/still being played.
Press once more to clear the display.
During playlist playback: Pressing this button displays
the numerical position of the current playlist in the
list of playlists shown on the “Playlists” screen.
(Example: “0003/0010” means playing playlist 3
out of 10 playlists.) Press once more to clear the
display.
2 LIST button
While the standby screen is displayed: Pressing this
button shows the last displayed list screen.
Subsequent presses change the displayed list screen,
in the following sequence.
During playlist playback: Pressing this button displays
details of the playlist. Press once more to clear the
display.
3 MENU button
When the menu is not displayed: Pressing this button
switches to menu mode, and the “MENU” screen
appears.
When the menu is displayed: Pressing this button
switches out of menu mode, and the menu display
disappears.
For details of the menu, see “Operation” (page 9).
123
456
7890
DISPLAY
PAU SE
PLAY
STOP
PUSH
ENTER
LIST MENU
1 DISPLAY button
2 LIST button
3 MENU button
4 ENTER/b, B, v, V control
5
STOP button
6
Forward shuttle playback button
7
Numeric buttons
8 Reverse shuttle
playback button
9 PAUSE button
0 PLAY button
“Playlists” screen (list of playlists)
“Video” screen (list of movie files)
“Graphics” screen (list of still image files)