Filter
Top Products
Sony Notebook User Guide
Getting help
76
nN
Make sure the mute setting is off on your DVD player.
Check the master volume setting of the Audio Mixer. If you have connected speakers externally,
check the volume settings of your computer speakers and check the connections between your
speakers and the computer.
In the Device Manager, check that the correct drivers are installed properly. To display the Device
Manager, click Start, and select Control Panel. Double-click the System icon. On the Hardware
tab, click the Device Manager button.
A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary,
reboot the computer, remove the disc and then check that it is not dirty or damaged.
On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows
®
, or using any
other software applications. System malfunctions originating from the user changing the DVD region code, are beyond the scope of your warranty
and will result in service charges for repair.
Why does my CD-RW drive not record at the highest speed?
You must use 8x CD-R or 4x CD-RW media or higher to achieve optimum performance.
If you want to use other media and are having difficulty formatting non-4x CD-RW discs, change the writing
speed from 4x to a lower setting.
To change the writing speed from the default to a lower speed, proceed as follows:
1 Go to My Computer from the Start menu.
2 Right-click the disc drive icon.
3 Select Properties.
4 Select the Settings tab.
5 Change the Current Write Speed field to 2x.
6 Click OK.
The VAIO notebook has a maximum recording rate of 8x for CD-R and 4x for CD-RW discs.