Filter
Top Products
Sony Notebook User Guide
Getting help
78
nN
The optional PCGA-UFD5 (USB) floppy disk drive is not recognized as drive A
To set the UFD5 to A, proceed as follows :
1 Turn the system power off and remove the docking station.
2 Turn the system power on.
3 Connect the UFD5
4 Select Control Panel from the Start menu.
5 Double-click System.
6 Select the Hardware tab, then click Device Manager.
7 Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
8 Select Operation, then Delete.
9 Keep clicking OK until the Confirmation of deletion of device message appears.
10 Perform the Scan to change hardware from Operation.
The UFD5 is recognized as drive A.
The floppy disk drive in the optional docking station connected to the notebook is not recognized as drive A
To set the docking station floppy disk drive to A, proceed as follows :
1 Turn the system power off and disconnect all peripherals.
2 Connect the docking station, then turn the system power on.
3 Select Control Panel from the Start menu.
4 Double-click System.
5 Select the Hardware tab, then click Device Manager.
6 Select Floppy disk controllers, then Standard floppy disk controller.
7 Select Operation, then Delete.