Sony VAIO Desktop User Guide
Upgrading your VAIO computer
81
nN
7 Press evenly against the memory module's upper corners. The end latches snap into position
automatically, as shown (3):
8 Reinstall the power supply and any add-on cards or components you removed.
9 Reinstall the power supply by following these steps:
❑ Rotate the power supply to its original position and slide it into the chassis until the tab snaps into
position.
❑ Replace the screw that secures the power supply to the rear of the chassis.
10 Replace the side cover as described in Closing the side cover.
✍ There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.
! Use only PC-2100 DDR SDRAM DIMM modules.