Filter
Top Products
24
Precautions
Additional information
AC power adapter
Be sure to use the supplied AC power adapter. Other
AC power adapters may cause a failure to the Access
Point.
Safety
Do not drop the Access Point. Careful handling will
help prevent damage.
Installation
Do not place the Access Point where it will be exposed
to the following conditions:
• Unstable surfaces.
• High humidity or poor ventilation.
• Excessive dust.
• Direct sunlight or extreme heat.
• Closed cars.
• Magnetized locations (near magnets, speakers, or
televisions).
• Locations exposed to frequent vibration.
• Locations where the transmission of radio waves
may be obstructed by metal plates or concrete walls
Operation
Exposure to cold-to-hot temperature extremes or very
damp environments may cause moisture to condense
on internal parts. This may prevent the Access Point
from operating properly.
If this should happen, unplug the AC power adapter
from the power outlet and let the Access Point sit for
two to three hours or until the moisture evaporates.
Cleaning
Clean the casing with a soft cloth, lightly moistened
with water or a mild detergent solution. Do not use
any type of abrasive pad, scouring powder or solvent
such as alcohol or benzene. This may damage the
finish of the casing.