Filter
Top Products
18 (GB)
Projecting
1 After all equipment is connected completely, plug
the AC power cord into the wall outlet.
The ON/STANDBY indicator lights in red and the
projector goes into the standby mode.
2 Press the I /
1
key to turn on the projector.
The ON/STANDBY indicator lights in green.
3 Turn on equipment connected to the projector.
Press the INPUT key to select the input source.
RESET
LENS CONTROL
POWER SAVING ON/STANDBY
MENU
TEMP/FAN
ENTER
APA
LAMP/COVER
INPUT
+
R
–
13
2
ENTER
CLICK
RESET/
ESCAPE
COMMAND
OFF · · ON
PJ · · NETWORK
LENS CONTROL
I /
APA
MENU/
TAB
MUTING
LASER
D ZOOM
FUNCTION
FOCUS
ZOOM
SHIFT
INPUT
PIC
FREEZE
5
2
7
4–7
4,6
3
3
4,7
2
4–7
Rear remote
control detector
ON/STANDBY
indicator
APA key
Selecting the Menu Language/Projecting
Selecting the Menu Language
You can select the language for displaying in the
menu and other on screen displays from 7 languages.
The factory setting is ENGLISH.
1 Plug the AC power cord into the wall outlet.
2 Press the I /
1
key to turn on the power.
3 Press the MENU key.
The menu display appears.
4 Press the M or m key to select the SET SETTING
menu, then press the , or ENTER key.
The SET SETTING menu appears.
5 Press the M or m key to select LANGUAGE, then
press the , or ENTER key.
6 Press the M or m key to select a language, then
press the < or ENTER key.
The menu changes to the selected language .
To clear the menu display
Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.
APA key
RESET
LENS CONTROL
POWER SAVING ON/STANDBY
MENU
TEMP/FAN
ENTER
APA
LAMP/COVER
INPUT
1
4,5,6 3 2
SET SETTING
STATUS: ON
INPUT-B TERM.
: PC DIGITAL
INPUT-A: COMPUTER
AUTO INPUT SEL
: OFF
LANGUAGE
: ENGLISH
POWER SAVING
: OFF
IR RECEIVER
: FRONT&REAR
INPUT-A