Sony SXRD 4K Projector User Manual


 
Page 28
The Projectors
Sony now offers four SXRD 4K projectors designed for Visualization,
Simulation, Auditoriums and Postproduction, the 100 Series. The four projectors
are differentiated by light output, input configuration, how they accept 4K signals
and maximum refresh rate.
Projector Model SRX-
S110
SRX-
S105
SRX-
R110
SRX-
R105
Brightness, Lumens
10,000 5,000 10,000 5,000
Pre-Installed Input Boards
DVI-D in
slot A
DVI-D in
slot A
None None
4K Signals Accepted
Analog Y, Pb, Pr
- - Yes Yes
Analog RGB
- - Yes Yes
HD-SDI
- - Yes Yes
DVI
Yes Yes - -
Maximum Refresh Rate
60 Hz 60 Hz 48 Hz 48 Hz
(NOTE: Since there are multiple methods of measuring brightness, the way that brightness is
specified will vary among manufacturers.)
For information on the SRX-R210 and SRX-R220 projectors for Digital Cinema,
please refer to sony.com/digitalcinema.
Physical layout
Tipping the scales at over 200 pounds, these projectors have an imposing
physical presence. Each projector includes two lamphouses arranged
symmetrically around the central axis, which contains the optical engine and lens.
The projectors can be operated on one or both lamps. In case of an outage, the
projectors automatically failover to the surviving lamp.
Right side of the projector chassis, showing input and control interfaces.
AC Input
Status Panel
Ethernet
RS232
Input Card Slots