Sony SXRD 4K Projector User Manual


 
Page 35
SRX-R110, SRX-R105:
Video: SD Component (Y,Cb,Cr)
HD (RGB; Y/Pb/Pr)
Computer: XGA, SXGA, UXGA
Power requirements SRX-S110, SRX-R110: AC 200 to 240 V, 50/60 Hz, 30 A
SRX-S105, SRX-R105: AC 100 to 240 V, 50/60 Hz, 30 A
Operating temperature 5° C to 35° C (41° F to 90° F)
Storage temperature -20° C to 60° C (-4° F to 140° F)
Operating humidity 35% to 85% (without condensation)
Storage humidity 10% to 90%
Dimensions (W x H x D) Approx. 740 x 500 x 1330 mm
(29 4/5 x 19 4/5 x 52 3/5 inches)
Mass Approx. 110 kg (242 lbs. 8 oz)
INPUT/OUTPUT
Input A SRX-S110, SRX-S105:
DVI-D interface board
SRX-R110, SRX-R105:
Open for optional signal interface board
Input B Open for optional signal interface board
Input C Open for optional signal interface board
Input D Open for optional signal interface board
Remote interface D-sub 9-pin, RS-232C (female) x 1
Ethernet terminal, 10Base-T/100Base-TX x 1
OPTIONAL LKRI-001 ANALOG INPUT BOARD
Inputs BNC x 5, (HD/SD analog video signal: RGB/Y or Y, Cb,
Cr selectable
Computer Signals [RGB] R: 0.7 Vp-p ±2dB positive, 75Ω
G: 0.7 Vp-p ±2dB positive, 75Ω
B: 0.7 Vp-p ±2dB positive, 75Ω
Sync HD horizontal: TTL level, high impedance, sync
positive/negative
HD Vertical: TTL level, high impedance, sync
positive/negative
Standard Definition Video [Y/Cb/Cr] Y: 1.0 Vp-p ±2dB sync negative, 75Ω
Cb: 0.7 Vp-p ±2dB positive, 75Ω
Cr: 0.7 Vp-p ±2dB positive, 75Ω
High Definition Video [RGB] R: 0.7 Vp-p ±2dB positive, 75Ω
G with sync: 1.0 Vp-p ±2dB, 75Ω, Tri-level sync: ±0.3
Vp-p, Bi-level sync: 0.3 Vp-p
B: 0.7 Vp-p ±2dB positive, 75Ω
High Definition Video [Y/Pb/Pr] Y: 1.0 Vp-p ±2dB, 75Ω, Tri-level sync: ±0.3 Vp-p,
Bi-level sync: 0.3 Vp-p