Sony SXRD 4K Projector User Manual


 
Page 34
Specifications
SXRD DEVICE
Display device SXRD (Silicon X-tal Reflective Display) panel
Size 1.55 inches, diagonal
Resolution 4096 (H) X 2160 (V) Pixels
Reflectivity 72%
Contrast (device only) More than 4000:1
Pixel pitch 8.5 μm
Spacing between pixels 0.35 μm
Response speed 5.0 msec (2.5 msec tr + 2.5 msec tf)
Liquid crystal mode Vertical Aligned Mode
Alignment layer Inorganic Thin Film
Backplane process 0.35 μm MOS Process
Liquid crystal cell gap Less than 2 μm
OPTICAL
Projection system 3 SXRD panel, prism color integrated system
Imaging device SXRD panel
1.55-inch (diagonal)
4096 (H) x 2160 (V) pixels on each chip
Lamp SRX-S110, SRX-R110: 2 kW Xenon lamp x 2
SRX-S105, SRX-R105: 1 kW Xenon lamp x 2
Screen Coverage (Approx.) 14 feet to 51 feet (4.5 to 15.5 m) (viewable area,
measured horizontally)
Light output SRX-S110, SRX-R110: 10,000 lumens ±10%
SRX-S105, SRX-R105: 5,000 lumens ±10%
(Since there are multiple methods of measuring brightness, the way
that brightness is specified will vary among manufacturers.)
GENERAL
Xenon White Reference X: 0.314, Y: 0.351
Contrast Greater than 1800:1
Resolution 600 TV lines (SDI input/SMPTE-259M)
1920 x 1080 pixels (HD-SDI input, SMPTE-292M)
4096 x 2160 pixels (RGB)
Signal specifications SRX-S110, SRX-S105:
Video: SD Component (Y,Cb,Cr)
HD (RGB; Y/Pb/Pr)
Computer: XGA, SXGA, UXGA
DVI-D: XGA, Quad-VGA, SXGA, UXGA, WUXGA, 1920
x 1080, 2048 x 1080