Filter
Top Products
Adjustment
Making Various Settings
55
For detailed information on how to enter characters,
see “Entering a Caption” on page 31.
You can use up to 16 characters.
3
Select EXIT by pressing the F, f, G or g button on
the USER NAME menu, then press the EXEC
button.
The user name is stored, and the SYSTEM SETUP
menu appears again.
4
Select the SAVE USER item, then select the desired
user set number.
5
Press the EXEC button.
All data currently set and adjusted are registered in
the user set number selected in step 4.
When you name a user set in step 2, the user name
is also registered at the same time.
The printer operates according to this registered data
unless you recall another user set. Also, if you modify
the settings, the modified data remains effective until
another user set is recalled, even if you turn off the
power.
To make another user set
Perform all required settings and adjustments using the
menus, then register them with another user set number.
To recall the user set and print
Select the desired user set by using the LOAD USER
item on the PRINTER SETUP menu, then press the
EXEC button to execute the selected user set.
The printer operates according to the recalled user set. If
you modify the set value, the printer operates according
to the modified data until you recall another user set.
To retain the originally set values
Example: Modify the settings made for user set 1. Retain
the original settings of user set 1 and register the
modified set values as user set 2.
1
Select user set 1 from the LOAD USER item on the
PRINTER SETUP menu.
2
Press the EXEC button to execute the selected user
set 1.
3
Modify the recalled set values.
4
Select 2 from the SAVE USER item on the
SYSTEM SETUP menu.
5
Press the EXEC button.
The set values, modified in step 3, are registered as
user set 2.
To copy the existing user set
You can copy an existing user set to another user set
number.
1
Select the source user set number from the LOAD
USER item on the PRINTER SETUP menu.
2
Press the EXEC button to execute the selected user
set.
3
Select the target user set number with SAVE USER
on the SYSTEM SETUP menu.
4
Press the EXEC button.
The set values of the source user set, selected in step
1, are copied to the target user set number selected
in step 3.