8 When Simple Mode is Used
Connecting to several projectors at
the same time
For setting and operations, see “When
Simple Mode is not Used” on page 10.
*1 A maximum of five projectors can be
connected at the same time.
*2 You can also use a wireless LAN device
(IEEE802.11b compliant) other than the
supplied USB wireless LAN module.
When Simple Mode
is Used
Setting the projector
1 Insert the supplied wireless LAN card
into the slot of the projector.
2 Turn on the projector.
3 Press the AIR SHOT key on the
remote commander.
The home display of Air Shot appears.
Check that [Simple Mode] is set to [On].
If the home display does not appear
Select [Air Shot] in [INPUT C FUNCTION]
of the “SET SETTING” menu.
For details of the “SET SETTING” menu,
see the attached Operating Instructions.
If Simple Mode is not set to [On]
See step 5 of “When Simple Mode is not
Used” on page 10 and set it to [On].
To change the network channel for
Simple Mode
The default setting is [11]. Set [Network
Channel] to the other channel. The channel
is selected from among 1 to 11.
• If the USB wireless LAN module is
connected to the computer, remove it before
setting.
• You may not be able to use some channels
according to the country.
Projector
Wireless LAN card
(supplied)
Computer
Projector
Projector
*1
Wireless LAN card
(supplied)
Wireless LAN card (supplied)
USB
wireless
LAN
module
(supplied)
*2
Notes