Filter
Top Products
21
Projecting
Projecting the Picture
For details, see “Auto Input Search”
in the Function menu on page 36.
• The Smart APA feature is effective for
the input (analog) signal from a
computer only.
(It is not effective for digital computer
signal.)
5 Switch the equipment connected to
output to the projector.
Depending on the type of your
computer, for example a notebook, or an
all-in-one LCD type, you may have to
switch the computer to output to the
projector by pressing certain keys (e.g.,
, etc.), or by changing
your computer’s settings.
The key used for switching the computer to
output to the projector varies depending on
the type of computer.
6 Adjust the upper, lower, left or right
position of the picture using the M/m/
</, key while pressing the SHIFT
key.
7 Adjust the size of the picture and the
focus.
Press the FOCUS key and adjust the
focus using the M/m/</, keys.
Press the ZOOM key and adjust the size
of the picture using the M/m/</,
keys.
The VPLL-1008 does not have the zoom
function. To adjust the focus of the picture,
turn the lens ring.
To adjust the tilt of the installation
surface
If the projector is installed on an uneven
surface, use the adjusters to keep the
projector level.
• Be careful not to let the projector down on
your fingers.
• Do not push hard on the top of the projector
with the adjuster extended.
It may cause a malfunction.
Note
Note
VGA
LCD
//
,
F7
Fx
Fn
or
and
Notes
Turn to
adjust
Adjusters