Filter
Top Products
Hareware Setup 7
CPU Type Configuration
This section shows you how to configure your CPU step by step. Note
that you need to check the CPU voltage before installation. This board
supports the Intel P54C/P55C/MMX, Cyrix 6x86/6x86L/6x86MX, and
AMD 5K86/K5/K6 CPUs. With the MMX technology supported, you
should be able to use MMX CPUs and configure these CPUs as normal
dual voltage CPUs.
❑ Step 1: Frequency Setting
P54C/P55C – 75/90/100 CPU Settings (1.5 x clock)
AMD K5 – PR75/PR90/PR100/PR120/PR133 (1.5 x clock)
654321
ON
SW1
654321
ON
SW1
654321
ON
SW1
W25P240AF
82439TX
SW1
654231
ON
Lithium
Battery
P54C/P55C– 90/60 MHz
AMD K5 – PR 90/60MHz
AMD K5 – PR 120/60 MHz
P54C/P55C– 100/66 MHz
AMD K5 – PR 100/66 MHz
AMD K5 – PR 133/66 MHz
P54C/P55C– 75/50 MHz
AMD K5 – PR 75/50 MHz
Figure 2Ð1Ð1. CPU Jumper Settings
Note: 1. You must equip the CPU with a fan and heat sink for system
stability.
2. AMD K5ÐPR90= AMD 5
k
86(SSA5)ÐP90.