Filter
Top Products
BIOS Setup 35
IDE Primary Master
UDMA/
IDE Primary Slave
UDMA/
IDE Secondary Master
UDMA/
IDE Secondary Slave
UDMA
Choose Auto (default) or Disabled.
Auto Ð Supports Ultra DMA mode.
On-chip Primary PCI
IDE/
On-chip Secondary PCI
IDE
Enabled Ð Use the on-board IDE
(default)
Disabled Ð Turn off the on-board IDE
USB Keyboard Support Choose Disabled (default) or Enabled.
You need to use the regular keyboard to
get in the BIOS Setup to enable this
function before using the USB keyboard.
Onboard FDC Controller Enabled Ð Use the on-board floppy
controller (default).
Disabled Ð Turn off the on-board floppy
controller.
Onboard Serial Port 1/
Onboard Serial Port 2
Choose serial port 1 & 2Õs I/O address.
Do no set port 1 & 2 to the same value
except for Disabled. IRQ can be
released when choose Auto. (??I donÕt
quite understand this sentence??)
Onboard IR Controller Choose Enabled to use the onboard IR
function
IR Address Select Choose 3F8H, 2F8H, 3E8H, 2E8H,
3E0H, or 2E0H to decide your IR
address.
IR Mode Choose IrDA, ASK2R, FIR, or CIR.
Contact with your IR device provider for
choosing the right mode.