Filter
Top Products
Hardware Setup SY-6ZB
27
3. Select [CHIPSET FEATURES SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
frequency, as shown in the following display.
Available [CPU Frequency] settings on your SY-6ZB Motherboard
are detailed in the following table. If you set this field to [Manual],
you are then required to fill in the next two consecutive fields: (1) the
CPU Host/PCI Clock, and (2) the CPU Ratio.
CPU Frequency
233MHz (66 x 3.5) 350MHz (100 x 3.5)
266MHz (66 x 4.0) 400MHz (100 x 4.0)
300MHz (66 x 4.5) 450MHz (100 x 4.5)
333MHz (66 x 5.0) 500MHz (100 x 5.0)
366MHz (66 x 5.5) 550MHz (100 x 5.5)
400MHz (66 x 6.0) 600MHz (100 x 6.0)
433MHz (66 x 6.5)
Select the working frequency of
your Pentium
®
III, Pentium
®
II,
Celeron processor among
these preset values.
Note: Mark the checkbox
that corresponds to the working
frequency of your Pentium
®
III,
Pentium
®
II, Celeron
processor in case the CMOS
configuration should be lost.
Note: if you use Bus Frequencies of 75 MHz, make sure that
your PCI cards can cope with the higher PCI clock.
4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory,
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
CPU Frequency
CPU Host/PCI Clock
CPU Ratio
AGP Clock
: 350Mhz(100*3.5)
: 100/33MHz
: x 3.5
: Auto
CPU Warning Temperature
Current System Temp.
Current CPU Temperature
Current CPUFAN Speed
Current CHAFAN Speed
: Disabled
: 24
°
C/75
°
F
: 29
°
C/84
°
F
: 6553 RPM
: 6553 RPM
CPU L2 Cache ECC Checking : Enabled
Boot Sequence : A, C, SCSI
Quick Power On Self Test : Enabled
VID(V)
3.3(V)
+12(V)
-5(V)
: 2.78 V
: 3.31 V
: 11.84V
: -4.88V
VTT(V)
+5 (V)
-12 (V)
: 1.50V
: 4.97V
: -11.45V
CPUFAN Off In Suspend : Enabled
ESC
F1
F5
: Quit
: Help
: Old Values
↑
↓
→
←
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
POWER ON Function
KB Power ON Password
Hot Key Power ON
Soft-Off by PWR-BTTN
Power-On by Ring/LAN
Power-On by Alarm
: BUTTON ONLY
: Enter
: Ctrl-F1
: Instant-Off
: Enabled
: Disabled
F6
F7
: Load BIOS Defaults
: Load Setup Defaults
CPU Frequency
CPU Host/PCI Clock
CPU Ratio
AGP Clock
: 350Mhz(100*3.5)
: 100/33MHz
: x 3.5
: Auto