Filter
Top Products
BIOS Setup Utility SY-6ZB
54
3-8.2 Keyboard Controls
Keyboard
Controls
Setting Description Note
Disabled Turn off the on-board
IDE
Default
USB Keyboard
Support
Enabled Use a USB keyboard
Disabled Default
Init AGP Display
First
Enabled If you choose to
initialize the AGP
Display card first,
instead of the PCI VGA
card.
BUTTON ONLY Disables the Wake-Up
by Keyboard function.
Default
KB Power ON
Password
Enables you to wake-up
the system by entering
a password at the
keyboard.
POWER ON
Function
Hot Key You can wake-up the
system by pressing the
key combination of your
choice (Ctrl-F1~F12).
If [POWER ON Function] is set to [KB Power ON Password]
KB Power ON
Password
Enter (your
password)
Set the password that will wake-
up your system.
If [POWER ON Function] is set to [Hot Key]
KB Power ON
Password
Ctrl-F1~F12 Choose the key combination
that will wake-up the system.
[Ctrl-F1 to Ctrl-F12]
KBC Input Clock
12 MHz Controls the frequency
of the clock signal of the
keyboard.
Set this value to 8MHz if
experience problems
with your keyboard.
Default