Filter
Top Products
BIOS Setup Utility SY-6ZB
42
CHIPSET FEATURES SETUP (Continued)
CHIPSET
FEATURES
Setting Description Note
If [CPU Speed] is set to [Manual]
66 MHz
68 MHz
75 MHz
83 MHz
100 MHz
103 MHz
112 MHz
CPU Host Clock
Select
Select the host clock of your
Pentium
®
II processor among these
values.
Note: For the ZX chipset, 66 and
100 MHz host clock frequencies are
acceptable. However, the system
stability is not guaranteed for other
frequencies due to the limitations of
this chipset.
If [CPU Speed] is set to [Manual]
CPU Ratio
After you have selected the host clock, choose
the right multiplier for the CPU. Options are: [2,
2.5, 3., 3.5, 4, 4.5, 5]. The CPU frequency is
then defined as [host clock freq.]x[multiplier],
and should the working frequency of your
Pentium
®
II processor.
Disabled Default
CPU Warning
Temperature
Enabled Set CPU temperature from
50°C to 70°C. The CPU will
slow down when CPU
temperature goes beyond
the preset value. The CPU
will continue to run slow
until the temperature
returns back within the safe
range.
Current System
Temp.
°C/°F
Show the current status of
the system temperature.
Current CPU
Temperature
°C/°F
Show the current status of
CPU temperature.