Filter
Top Products
Hardware Installation SY-7ISA+
20
2-3.1 CPU Installation
To perform the installation of your new SY-7ISA+ Motherboard, follow
the steps below:
Mark your CPU Frequency:
Record the working frequency
of your FC-PGA CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0) 466MHz (66 x7.0) 533MHz (66 x 8.0) 600MHz (66 x 9.0) 667MHz (66 x 10.0)
433MHz (66 x 6.5) 500MHz (66 x7.5) 566MHz (66 x 8.5) 633MHz (66 x 9.5) 700MHz (66 x 10.5)
FSB 100MHz
500MHz (100 x 5.0) 600MHz (100 x 6.0) 700MHz (100 x 7.0) 800MHz (100 x 8.0)
550MHz (100 x 5.5) 650MHz (100 x 6.5) 750MHz (100 x7.5) 850MHz (100 x 8.5)
FSB 133MHz
533MHz(133x4.0) 667MHz(133x5.0) 800MHz(133x 6.0) 933MHz(133x 7.0) 1.13GHz(133x 8.5)
600MHz(133x4.5) 733MHz(133x5.5) 866MHz(133x 6.5) 1000MHz(133x 7.5)
This Motherboard is designed to support processors with 66/100/133
MHz FSB.
CPU Mount Procedure:
To mount the processor that you have
purchased separately, follow these instructions.
1. Lift the socket handle up to a vertical position.