Filter
Top Products
Hardware Installation SY-7ISA+
35
2. Infrared (IR1)
Plug the 5-pin infrared device cable to the IR1 header. This will enable the
infrared transfer function. This Motherboard meets both the ASKIR and
HPSIR specifications.
Please install according to the following pin assignment:
3. CD Line-in
This Motherboard provides two CD-Line in connectors. Please connect the
4-pin audio cable from your CD-ROM drive.
Please install according to the following pin assignment:
Serial Infrared (IR1) Connector
IR1 Pin Assignment
1
2
3
4
5
VCC
IRRX
GND
IRTX
CDIN1(
CD Line-in)
Pin Assigment
Right
Left
GND
GND
1 2 3 4