Filter
Top Products
BIOS Setup Utility SY-7ISA+
72
3-5.6 Onboard Serial Ports
Onboard Serial
Ports
Setting Description Note
Disabled
3F8/IRQ4 Default
(port 1)
2F8/IRQ3 Default
(port 2)
3E8/IRQ4
2E8/IRQ3
Onboard
Serial Port 1 /
Serial Port 2
Auto
Choose serial port 1 & 2's I/O
address.
Do not set port 1 & 2 to the
same address except for
Disabled or Auto.
Normal Default
IrDA
UART Mode
Select
ASKIR
The second serial port offers
these InfraRed interface modes.
If [UART Mode Select] is set to [IrDA]/[ASKIR]
Half Default
UR2 Duplex
Mode
Full
Choose [Half] or [Duplex] to set
UR2 in half duplex mode or full
duplex mode respectively. Refer
to your IR device specifications
to select the suitable mode.
3-5.7 Onboard Parallel Ports
Onboard Parallel
Ports
Setting Description Note
Disabled
378/IRQ7 Default
3BC/IRQ7
Onboard Parallel
Port
278/IRQ5
Choose the printer I/O
address.
SPP Default
EPP
ECP
Parallel Port Mode
ECP+EPP
The mode depends on your
external device that
connects to this port.
If [Parallel Port Mode] is set to [ECP] mode
3 Choose DMA3 Default
ECP Mode use
DMA
1 Choose DMA1