Hardware Installation SY-7IWA-F
32
2-3.3.4 Other Connections
1. Serial Port COM 1 and COM2
The Motherboard package includes one set of serial port flat cables with 9-
pin connectors assembled on a bracket.
Plug the 9-pin end of the flat cable into the COM1/COM2 serial port
header on the Motherboard, as shown in the figure below, then fix the
bracket connector to the rear panel of the computer case. Then plug your
serial device cable directly into the 9-pin male connector located at the
back of your computer.
COM 2
COM 1
9-pin serial
flat cable
9-pin male external
serial connector
Bracket