Filter
Top Products
Hardware Installation SY-7IWA-F
46
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.
Step 2. Select [Load Optimized Defaults]
Select the “Load Optimized Defaults” menu and type “Y” at the prompt to
load the BIOS optimal setup.
Step 3. Select [Soyo Combo Feature]
(a) CPU Host/PCI Clock
CPU Host / PCI Clock
o 66/33 o 100/33 o 133/44
o 70/35 o 105/35 o 140/35
o 75/37 o 114/38 o 150/37
o 83/41 o 120/40
o 90/30 o 124/41
o 95/31 o 133/33
The PCI clock frequency depends on
the CPU Host clock. (Fixed pairs in the
clock generator) see the table on the
left side for all possible pairs.
(b) CPU Ratio
After you have selected the CPU Host/ PCI Clock, choose the right
multiplier for the CPU. CPU Ratio options are:
o x 2 o x 2.5 o x 3 o x 3.5 o x 4
o x 4.5 o x 5 o x 5.5 o x 6 o x 6.5
o x 7 o x 7.5 o x 8
The CPU frequency is then defined as [host clock freq.] x [multiplier], and
should the working frequency of your CPUs processor.
Step 4. Select [Save & Exit Setup]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.