Filter
Top Products
Using Your Printer 17
Forms Tear-Off Feature
Note: This feature is normally turned off. To use Forms
Tear-Off, you must enter the menu and change the
setting to the desired time interval (see next page).
The Forms Tear-Off feature allows a printed continuous forms
page to be torn off without wasting paper or adjusting the
printer. It can be used for rear feed continuous forms, bottom
feed continuous forms (with the optional push tractor installed)
or for top feed roll paper (with optional roll paper stand
installed).
When the printer is turned on, the paper feeds to the tear-off
position.
When data is received, the paper automatically moves down to
the print position (TOF) and printing begins.
Note: You can also move the paper down to the print position
manually by pressing TEAR.
When printing stops, Forms Tear-Off automatically moves the
paper to align the perforation with the tear bar (located under
the access cover), after the time interval which you selected
through the menu.
Paper remains in the tear-off position until the printer receives
more data. Then, the paper moves back down for printing.
Notes: The status of the Forms Tear-Off menu setting affects
how you set.8(feinganuous foT)74(e(s)10232(o)-2.51rm):-11.1(p ee n12.(“)80.43)74(e(s)10232(o)-2.51rm)(TOF) ]TJT*0.00015Tc0.02374Tw[(hnd p)102324ofus fo9earf ” ar2(a)per