Filter
Top Products
Super Systems Inc. Page 95 SDS Data Logger Manual #4565 Rev D
TC Spool SN The spool number 18
TC Spool Correction The spool correction factor 8
TC Gauge The gauge of the TCs 2
Use Active TC Use the active TC settings option N/A
Settings
Check box 1 – The active TCs for the survey N/A
Check box 40
SDS 8020 SDS 8020 instrument option N/A
(Version 1.101.0.76 & Below)
SDS 8040 SDS 8040 instrument option N/A
(Version 1.101.0.76 & Below)
Controller MFG The controller manufacturer 18
Controller Model The controller make/model 18
Instrument Type The type of the instrument 1
Cycle Time The PID cycle time 2
Dead Band The PID dead band 4
Output Limit The PID output limit 3
PB (Gain) The PID PB (gain) 5
Rate The PID rate 6
Reset The PID reset 6
Notes
Version 1.101.0.71 & Below
• When the SDS 8020 option is selected, the SDS software automatically fills in “20” in the
“Number of TCs” field and Check boxes 21 through 40 (Boards 5 through 8) are disabled
• When the SDS 8040 option is selected, the SDS software automatically fills in “40” in the
“Number of TCs” field and Check boxes 21 through 40 (Boards 5 through 8) are enabled
• When “20” is typed into the “Number of TCs” field, the SDS 8020 option is automatically selected,
and Check boxes 21 through 40 (Boards 5 through 8) are disabled