Filter
Top Products
37
Forms are smudged.
Printing is too dark.
The printer is not set up
correctly for the thickness of
paper being used.
Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 26.
The ribbon is jammed,
twisted, or not set correctly
between the print head and
the print head shield.
Make sure that the ribbon
cartridge is installed
correctly. See “Installing the
ribbon cartridge” on page 5.
Print head shield is damaged
or missing.
Return it to your dealer for
repair.
Printer prints past the edge
of the paper.
The paper guide is not
positioned correctly.
Remove the paper and
adjust the position of the
paper guide. Reload the
paper and try printing again.
The ribbon is jammed,
causing the print head to
jam.
Make sure that the ribbon
cartridge is installed
correctly. See “Installing the
ribbon cartridge” on page 5.
Paper is jamming, causing
the print head to jam.
Remove all paper from the
printer and reload it. Try
printing again.
Set up the printer for the
paper thickness you are
using. See “Adjusting for
paper thickness” on page 26.
Incorrect margin settings
are selected by your
application program.
Choose different margin
settings from your
application program.
Problem Possible Cause Recommended Action