Filter
Top Products
Selecting a bank 29
Note:
The contents of the above message are the same, regardless of whether you
enter EDS-1 or EDS-2. The asterisks indicate the current EDS Mode switch
settings for all the banks in both sub-modes.
Selecting a bank
❏
While in the EDS Modes (EDS-1 or EDS-2), use the control panel’s BANK
button to select a bank. While the BANK indicator is flashing, the lit
indicator indicates the currently selected bank.
Note:
EDS-2 has only three banks, so pressing the BANK button cycles through banks
A, B, and C only. Indicators D4, E5, and F6 do not light with EDS-2.
Lit Indicator Selected Bank
A1 A
B2 B
C3 C
D4 D
E5 E
F6 F