Filter
Top Products
148
APPENDIX
DIP Switch 1
The following table shows all the possible settings for DIP Switch 1. All switch
settings, except for 1-7 and 1-8, are ON when the printer is shipped from the
factory.
DIP Switch 2
The following table shows all the possible settings for DIP Switch 2. The
factory default setting for this switch is all ON.
Switch Parameter ON OFF
1-1
Baud Rate See table below
1-2
1-3 Data Length 8 bits 7 bits
1-4 Parity Check Disabled Enabled
1-5 Parity Selection Odd Even
1-6 Handshake DTR/DSR XON/XOFF
1-7 Serial I/F Pin 6 Reset Signal Active Inactive
1-8 Serial I/F Pin8 Reset Signal Active Inactive
Baud Rate Switch 1-1 Switch 1-2
2400BPS OFF OFF
4800BPS ON OFF
9600BPS ON ON
19200BPS OFF ON
Switch Parameter ON OFF
2-1
Thermal Print Density See table below
2-2
2-3 Input Buffer Size 4 KB 45 bytes
2-4 Always ON