Star Micronics TUP492-24 Printer User Manual


 
– 8 –
5.2 Setting the DIP Switches
All of the DIP switches have been set to ON at the time of shipping.
5.2.1 Serial Interface
a) DIP switch 1 (for both RS-232C and RS-422A)
Switch position Function ON OFF
1-1 Baud rate
1-2
1-3 Handshaking DTR XON/XOFF
1-4 Data length 8 bits 7 bits
1-5 Parity Disabled Enabled
1-6 Parity Odd Even
1-7 DC1, 3 (*1) Disabled Enabled
1-8 Power on (*2)
*1 Only for the RS-232C (This setting is made with DIP switch 2 on the RS-422A.)
*2 For the power on function
1-8 ON 1-8 OFF
When DC1, 3 is disabled Select Select
When DC1, 3 is enabled Select Deselect
When addressable Deselect Select
Baud rate 1-1 1-2
2400BPS OFF OFF
4800BPS OFF ON
9600BPS ON ON
19200BPS ON OFF