Filter
Top Products
4
Printer Setup
Installing the platen knob
You can find the platen knob in the box of items that contains this manual.
❏
Install the knob on the shaft located inside the large hole on the right side of
the printer. Make sure that the two metal pins on the platen shaft fit into the
slots inside the knob’s spindle. Press the knob carefully but firmly into
place as far as it will go.
Opening the front cover
❏
Lift up on the front cover and swing it open until it stops.
❏
To close the front cover, simply lower it back into place.
Caution!
The tear assist edge is rather sharp. Take care to avoid injuring your hands.