![](http://pdfasset.owneriq.net/5/f9/5f91efcc-1133-4fef-8696-b1c1faef2695/5f91efcc-1133-4fef-8696-b1c1faef2695-bgc.png)
6
Printer Setup
make sure that the side tabs fit into the grooves on the sides of the cartridge
holder.
❏
While guiding the ribbon between the print head and print head shield,
press down gently on the cartridge until the side tabs snap securely into
place.
❏
Rotate the knob on the cartridge again to take up any slack.
❏
Close the front cover of the printer.
Important!
Printing that is poor quality or too light is almost always due to a ribbon that is
simply worn out or “used up.” If you experience problems with print quality,
check the conditio of the ribbon. If the black part looks gray and well-worn,
replace the ribbon with a new one.