Filter
Top Products
Adjusting for paper thickness 39
Original + 3 to 4 (Multi-Part Mode)
Multi-part Mode and an optional pull tractor are
recommended when printing on 4 or 5-ply paper.
Adjusting for paper thickness
Paper comes in different weights, normally expressed as gsm (grams per square
meter) or lbs (pounds). Some form paper also has multiple pages that make them
quite thick. Use the following procedure to change the gap between the print
head and the platen and adjust for paper thickness.
❏ Move the adjustment lever to one of its settings. Position 2 or 3 is most
suitable for single-sheet paper.