Filter
Top Products
Selecting a bank 25
Selecting a bank
❏
While in the EDS Mode, use the control panel’s BANK button to select a
bank. When the BANK indicator flashes it indicates the current bank
selected.
Selecting a switch
❏
While in the EDS Mode, use the control panel’s SWITCH button to select a
bank switch. When the SW indicator flashes it indicates the current switch
selected.
Changing a switch setting
❏
After selecting a bank and switch, press the control panel’s ON/OFF
button to turn the switch on and off. The current setting of the switch is
indicated by the ON LINE indicator: the indicator is lit when the switch is
on, and is not lit when the switch is off.
Lit Indicator Selected Bank
A (SANSERIF) A
B (COURIER) B
C (PRESTAGE) C
D (ROMAN) D
E (LQ) E
F (DRAFT) F
Lit Indicator Selected Switch
1 (10CPI) 1
2 (12CPI) 2
3 (15CPI) 3
4 (COND) 4
5 (PROP) 5
6 (QUIET) 6