Filter
Top Products
Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 117
For Internal Use Only
t3 disk Remove
Component
Red Y [ Info/Action ]
disk.u2d3(SEAGAT
E.ST318203FSUN18
G.LRG07139) was
removed from
diag158
(ip=xxx.20.67.158)
Information: The Sun
StorEdge T3+ array
has reported a disk
has been removed
from the chassis.
Recommended action:
Replace the disk
within the 30-minute
power shutdown
window.
t3 interface.
loopcard
Remove
Component
Red Y [
Info/Action ]
Information:
The Sun StorEdgeT3+
array has reported
that a loopcard has
been removed from
the chassis.
Recommended action:
Replace the loopcard
within the 30-minute
power shutdown
window
t3 power Remove
Component
Red Y [
Info/Action ]
’power.u1pcu2’(TE
CTROL-CAN.300-
1454-
01(50).008275)
was removedfromT3
diag213
(ip=xxx.20.67.213)
Information: The Sun
StorEdge T3+ array
has reported that a
power cooling unit
has been removed
from the chassis.
Recommended action:
Replace the PCU
within 30-minute
shutdown window.
t3 controller State
Change+
’controller.u1ctr
’inT3 diag213
(ip=xxx.20.67.213)
is now Available
(status-state changed
from disabled to
ready-enabled)
Category Component EventType Sev Action Description Information