Filter
Top Products
Chapter 5: Advanced Motherboard Setup
5-21
CMOS Clear
Refer to the table on the right for
setting JBT1 to clear CMOS. Al-
ways remove the AC power cord
from the system before clearing
CMOS.
CMOS Clear Jumper Settings
(JBT1)
Jumper
Position
1-2
2-3
Definition
Normal
CMOS Clear
Speaker Enable/Disable
Jumper JP32 allows you to enable
or disable the onboard speaker.
Refer to the table on the right for
jumper settings.
Speaker Enable/Disable
(JP32)
Open
Closed
Disabled
Enabled
Onboard LAN Enable/
Disable
SSE+ (Rev. 1.1, Rev. 1.11):JP31, JP33
SSR+/SSE+ (Rev.1.2 & above):JP31,
JP35
Change the setting of jumpers
listed in the tables on the right to
enable or disable LAN1 and LAN2
on your motherboard, respec-
tively.
Jumper
Position
Closed
Open
Definition
Enabled
Disabled
Onboard LAN2
Enable/Disable
Jumper Settings
(JP31)
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
Onboard LAN1
Enable/Disable
Jumper Settings
(JP33)
Jumper
Position
Closed
Open
Definition
Enabled
Disabled
Onboard LAN1
Enable/Disable
Jumper Settings
(JP35)