Filter
Top Products
Chapter 6: Advanced Chassis Setup
6-5
Figure 6-3. Removing a Dummy Drive Tray
1
1
1
1
Installing/Removing Hot-swap Drives
To remove a carrier, push the release button located beside the drive LEDs.1.
Swing the handle fully out and use it to pull the unit straight out (see Figure 2.
6-5).
!
Figure 6-4. Mounting a Hard Drive in a Carrier
Drive Carrier
Hard Drive
1
2
1
2
Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the
Supermicro Web site at http://www.supermicro.com/products/nfo/storage.
cfm