Filter
Top Products
Chapter 7: BIOS
7-29
4. Power on your system and click the <Connect> button in the Hyper Terminal.
The terminal screen will display the following messages.
5. Following the instructions given on the screen to update the BIOS. These
instructions are also shown below.
a. At the prompt, press the <SpaceBar> to update the BIOS.
b. When asked to confi rm BIOS updating, press <y> to confi rm BIOS
updates.
c. Press <y> again to begin fl ashing BIOS remotely.
Note: Be sure to complete Steps a~c above quickly because
you have a second or less to do so.