Filter
Top Products
Chapter 2: Installation
2-23
FAN2
FAN3
FAN1
JI2C1
JI2C2
JWOR
FAN4
JP3
JWD
JLED
Battery
DIMM1A
DIMM2A
DIMM1B
DIMM2B
I-SATA4
I-SATA5
WO
Speaker
COM1
KB/MOUSE
CPU Fan
VGA
USB
3/4/5/6
USB 1/2
LAN
Fan5
Audio
4-Pin PWR
Processor
Slot7 PCI-E x1
Slot6 PCI-E x16
Slot5 PCI-E x4
Slot4 PCI-33MHz
JP5
Slot3 PCI-33MHz
JP2
Slot2 PCI-33MHz
Buzzer
SPKR1
Slot1 PCI-33MHz
C2SBA
WOL
IDE#2
IDE#1
FP USB 7/8
FP USB 9/10
I-SATA0
I-SATA1
JL1
LE1
Front Panel CTRL
Intel G33
North Bridge
South Bridge
Intel ICH9(R)
24-pin ATX PWR
Audio CTRL
CD-IN
COM2
Front Audio
W83627DHG
Floppy
S I/O
IDE CTRL
ITE 8212
Audio Enabled
Front-Access USB 11Front-Access USB 12
I-SATA2
I-SATA3
JPUSB1
JKB
JPUSB2
GLAN CTRL
JPL1
JBT1
BIOS
Parallel Port
A
B
A. JI
2
C1
B. JI
2
C2
C. Keyboard Wake-Up
PCI/PCI-E Slots to SMB
Speeds
Jumpers JI
2
C1/JI
2
C2 allow you to con-
nect PCI/PCI-Exp. Slots to the System
Management Bus. The default setting is
open to disable the connection. See the
table on the right for jumper settings.
SMBus to PCI-X/PCI-Exp Slots
Jumper Settings
Jumper Setting Denition
Closed Enabled
Open Disabled (Default)
C
Keyboard Wake-Up
The JKB jumper is used together with
the Keyboard Wake-Up function in BIOS.
Enable the jumper and the BIOS setting to
allow the user to "wake the system up" by
hitting a key on the keyboard. See the table
on the right for jumper settings. Your power
supply must meet ATX specication 2.01
or higher and supply 720 mA of standby
power to use this feature.
KB Wake-up Enable
Jumper Settings
Pin# Denition
1-2 Enabled (default)
2-3 Disabled