Filter
Top Products
1-3
Chapter 1: Introduction
Details on installation of memory modules into the SBA-7142G-T4 blade module are
found in Chapter 3: "Setup and Installation" on page 3-1.
Storage
The SBA-7142G-T4 blade module can have four 2.5" SATA (Serial ATA) hard disk drives
in front-mounted easy removable carriers. See Chapter 3: "Setup and Installation" on
page 3-1 for storage installation details.
RAID
Each SBA-7142G-T4 blade module supports up to four hard drives, which may be used
with SATA drives to create a RAID 0 or 1 (or JBOD) array using the Windows™ and
Linux™ operating systems.
Further information on RAID software can be found on our website at: http://
www.supermicro.com/manuals/other/
LSI_2108_2208_SAS_MegaRAID_Configuration_Utility.pdf
Density
A maximum of ten blade modules may be installed into a single blade enclosure with
two nodes. Each blade enclosure is a 7U form factor, so a standard 42U rack may
accommodate up to six enclosures with 60 blade modules. With the inclusion of six
CMM modules, twelve Gigabit Ethernet switches and twelve 10G or InfiniBand switches,
this would occupy up to 84U space in a conventional 1U dual processor server
configuration.