Filter
Top Products
SBA-7142G-T4 Blade Module User’s Manual
3-6
Populating Memory Slots
The mainboard of a SBA-7142G-T4 blade module has 16 memory slots. Both
interleaved and non-interleaved memory are supported, so you may populate any
number of DIMM slots.
Populating slots at the same time with memory modules of the same size and of the
same type will result in four-channel, interleaved memory, which is faster than
single-channel, non-interleaved memory. See Table 3-1 and Figure 3-5 for details.
WARNING: For an interleaved configuration, memory modules of the same size and
speed must be installed. You should not mix DIMMs of different sizes and speeds.
NOTE: The DIMM slot number specified in Table 3-1 equals the DIMM slot to be populated.
A “---” indicates that the DIMM slot should be left unpopulated. DIMMs for one board are P1/
P2 and P3/P4 for the other board.
NOTE: Though multiple DIMM memory module types and speeds may be supported, you
need to use DIMM memory modules of the same speed and type.