Filter
Top Products
5-9
Chapter 5: BIOS
Hardware Health Configuration
The menu options in the HARDWARE HEALTH CONFIGURATION submenu and their
descriptions are shown in Table 5-8.
ACPI Configuration
The menu options in the ACPI CONFIGURATION submenu and their descriptions are
shown in Table 5-9.
VT-UTF8 Combo Key
Support
Allows you to Enable or DISABLE VT-UTF8 combination key support for ANSI/
VT100 terminals.
Sredir Memory
Display Delay
Use this setting to set the delay in seconds to display memory information.
Options are No Delay, 1
SEC, 2 SECS and 4 SECS.
Table 5-8. Hardware Health Configuration Submenu
Menu Option Description
CPU Overheat Alarm
This option lets you specify the CPU Overheat Alarm to either The Early Alarm or
The Default Alarm.
CPU Information
Static CPU health information is shown in this submenu. The following
information is shown: CPU 1 Temperature, CPU Temperature, NB Temperature,
System Temperature, CPU1 Vcore, CPU2 Vcore, CPU1 Mem VTT, CPU2 Mem
VTT, CPU1 Mem, CPU2 Mem, 1.1V, 5V, 5VSB, +12V, 3.3Vcc and 3.3VSB.
Table 5-9. ACPI Configuration Submenu
Menu Option Description
ACPI Aware O/S
This option enables or disables ACPI support for the operating system. Options
are Yes or No.
ACPI APIC
support
Use this setting to include the ACPI APIC table pointer to the RSDT pointer list.
Options are Enabled and Disabled.
Headless Mode This setting Enables or Disables the Headless operation mode through ACPI.
ACPI Version
Features
This option enables RSDP pointers to the 64-bit Fixed System Description Table
and specifies the ACPI Version. Options are ACPI v1.0, ACPI v2.0 and ACPI
v3.0.
Table 5-7. Remote Access Configuration Submenu (Continued)
Menu Option Description