SUPER MICRO Computer X9DRD-LF Computer Hardware User Manual


 
Chapter 1: Overview
1-9
•Power-on mode for AC power recovery
•Intel® Intelligent Power Node Manager (NM) (Available
when the NMView utility is installed in the system)
•Management Engine (ME)
PC Health
CPU Monitoring
Monitoring
•Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB, +5V,
+5V SB, +12V, Chipset Voltage, and Battery Voltage.
•CPU 5-Phase switching voltage regulator
•CPU/System overheat LED and control
•CPU Thermal Trip support
•Thermal Monitor 2 (TM2) support
Fan Control
•Fan status monitoring with rmware 4-pin (Pulse Width
Modulation) fan speed control
•Low noise fan speed control
System
Manage-
ment
•PECI (Platform Environment Conguration Interface)
2.0 support
•UID (Unit Identication)/Remote UID
•System resource alert via SuperDoctor® III
•SuperDoctor® III, Watch Dog, NMI
•Chassis Intrusion Header and Detection
Dimen-
sions
•13.00" (L) x 10.30" (W) (330.20 mm x 261.62 mm)
Note 1: For IPMI Conguration Instructions, please refer to the Embedded
IPMI Conguration User's Guide available @ http://www.supermicro.com/
support/manuals/.
Note 2: Changing BMC log-in information is recommended during initial
system power-on. The default username is ADMIN and password is
ADMIN. For BMC best practices, please refer to: http://www.supermicro.
com/products/nfo/les/IPMI/Best_Practices_BMC_Security.pdf