Filter
Top Products
6-1
Chapter 6
RS-232 Interface
Introduction
This chapter covers RS-232 host information for setting up your scanner. The RS-232
interface is used to attach the scanner to point-of-sale devices, host computers, or other
devices with an available RS-232 port (e.g., com port). This scanner uses TTL RS-232
levels which will interface with all PC's without any additional hardware.
Note:For particularly noisy electrical environments you may require a
cable with a RS-232 transceiver. To obtain this cable, contact
Symbol Support Center.
If your particular host is not listed in Table 6-2, you need to set the communication
parameters to match your host device. To set communication parameters for hosts not
listed, refer to the documentation for the host device.
Throughout the programming bar code menus, default values are indicated with asterisks
(
*).
*Baud Rate 9600
Feature/Option
* Indicates Default