Filter
Top Products
6-3
RS-232 Interface
Note:See Appendix A, Standard Default Parameters for all user
preferences, hosts, symbologies, and miscellaneous default
parameters.
Table 6-1. RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard
1
6-6
Baud Rate 9600 6-9
Parity None 6-11
Check Receive Errors Enable 6-13
Hardware Handshaking None 6-14
Software Handshaking None 6-17
Host Serial Response Time-out 2 Sec 6-20
RTS Line State Low RTS 6-22
Stop Bit Select 1 6-23
Data Bits 8-Bit 6-24
Beep on <BEL> Disable 6-25
Intercharacter Delay 0 msec 6-26
Nixdorf Beep/LED Option Normal Operation 6-28
Ignore Unknown Characters Send Bar Codes 6-29
1
User selection is required to configure this interface and this is the most common selection.