TANDBERG 6000 MXP Computer Monitor User Manual


 
TANDBERG 6000 MXP
40
3.5.1 Place a Call
The TANDBERG system can make both Video calls
and Telephone calls. A Call Type selector
button is placed to the right of the number entry field. The button shows if it is a video call
(default) or a telephone call. Press the button to show a drop down list to select the type of call.
Display the Call menu by either:
1. Select Make a Call from the menu, or
2. Press the green Call button on the remote control
In the Call menu, enter the Dial Number either:
1. Manually, or
2. Select the book symbol in order to display the Phone Book
and select a conference
participant.
Select type of Call – Telephone Call or Video Call
1. If you are dialing manually you might need to change the type of call. A button to the right
of the entry field shows if you have a telephone call or a video call. This button is called
the Call Type Selector.
2. Click on the Call Type Selector to the left of the entry field and press OK to see the
options. Select the type of call, Video Call or Telephone Call and press OK.
When dialing manually, toggle between ABC/abc by pressing the # button on the remote control
and between abc/123 by holding the # button for one second. For IP addresses, use a star as a
separator in the IP address.
If you are making a video call and the system is registered on a gatekeeper or border controller
with DNS support, there are several ways to call into the system:
<IP address>
<E.164>
<H.323 ID>
<H.323 ID>@<domain>
<E.164>@<domain>
<H.323 ID>@<IP address>
<E.164>@<IP address>
See H.323 Settings
for details.