Filter
Top Products
16
TANDBERG GatewayInstallation
GW
Accessing the gateway
You may access the gateway by entering the IP-address of the gateway in a standard WEB-browser. You will
then be asked to enter a password. It is not necessary to enter ‘User Name’. The default password for the
gateway is ‘TANDBERG’. Remember that the password is case sensitive.
IF YOU DO NOT KNOW THE IP-ADDRESS, PLEASE FOLLOW THE
PROCEDURE IN ‘INSTALLATION’, ‘SYSTEM CONFIGURATION’.
TIP
THE PASSWORD CAN BE CHANGED IN ‘SYSTEM CONFIGURATION’,
‘MISC’. SEE ALSO THE ‘CONFIGURE MISCELLANEOUS PARAMETERS’
SECTION IN ‘CONFIGURE THE GATEWAY’.
TIP
Gateway start-up
To start the gateway, please make sure that the power cable is connected, and press the power switch button
to ‘1’.
On the front panel of the system the power indicator LED, marked ‘Pwr’, will now turn GREEN.