Filter
Top Products
TANDBERG Gateway
43
Configure the Gateway
Authentication Mode
Off Register to the Gatekeeper without authentication.
Auto Register to the Gatekeeper with H.235 authentication using ID/Password given below.
Authentication ID, Password
Enter the ID and password required to perform H.235 authentication at the Gatekeeper.
To register to a Gatekeeper that requires authentication, an NTP server has to be configured.
Quality of Service
The network must support Quality of Service for these settings to work.
RSVP
Off No RSVP Quality of Service is initiated for any connections.
Auto Resource Reservation Protocol enables the gateway to request the optimal amount of bandwidth for
the duration of an IP video call.
QoS Mode
Off No QoS is used
Diffserv Diffserv QoS method is used. Please see ‘QoS Mode Configuration’ for details.
Precedence IP Precedence QoS method is used. Please see ‘QoS Mode Configuration’ for details.
NOTE
THE GATEWAY MAY BE REGISTERED WITH A BORDER CONTROLLER IN THE SAME WAY IT IS REGISTERED WITH A GATEKEEPER. USE THE IP ADDRESS OF
THE BORDER CONTROLLER IN THE GATEKEEPER ADDRESS FIELD.
Gatekeeper IP Address
Enter the Gatekeeper IP Address that the gateway should register to.