Filter
Top Products
TANDBERG Gateway
57
Configure the Gateway
Gateway Features
Experience has shown that some features - even though they are standardized - might cause interoperability
problems with legacy video conferencing products. If you disable features on this page, the gateway can be used
as a filter to ensure interoperability with legacy products.
To configure the gateway features, open ‘Gateway Configuration - Features’ as shown in the figure below.
Natural Video
Allows video formats and capabilities such as interlaced video (iCIF/iSIF) to be transmitted through the gateway.
When disabled no interlaced video capabilities will be transmitted.
Custom Video Formats
Allows H.263 custom video formats and capabilities such as SIF, 4SIF and VGA resolution to be transmitted
through the gateway. When disabled no H.263 custom video formats or capabilities will be transmitted.
Duo Stream (Duo Video / H.239)
Allows an additional video stream to be transmitted through the gateway using Duo Video or the H.239 protocol.
When disabled no Duo Video or H.239 capabilities will be transmitted.