TANDBERG ENTRYPOINT Network Card User Manual


 
D 14050.04
10.2007
43
TANDBERG ENTRYPOINT
USER GUIDE
Table of
Contents
Trademarks &
Copyright
Patents &
Disclaimers
Safety/
Environmental
To Get You
Up and Going
Using the
Entrypoint
Viewing the
System Status
Configuring
the Entrypoint
Maintenance
& Upgrade
Services
Dial Plan
Examples
Contact
Information
Services
TANDBERG ENTRYPOINT
USER GUIDE
To view all dialplan configuration
entries or create a new dial plan
select the Dialplan configuration
menu item from the Services
tab.
Dialplan Conguration
To view the dialplan entry details, click on the
dialplan entry or on View/Edit of the respective
dial plan. As has been discussed on the previous
page four default services can be distinguished:
Direct Inwards Dialling
•
Dial Extension (IVR)•
Menu•
TMS Corporate Directory (Phone book)•
For each default service the dialplan setup will
be illustrated with an example on the following
pages.
Note: Number matching is performed on dial
plans from the top to bottom.
Each dial plan has the following general fields,
i.e. Dialplan entry details:
Enabled.
• If the box is checked the service
becomes available.
Name.
• The name of the dial plan as represented
in the Dialplan Configuration overview.
Net type.
• Inbound call net type; either H.324m,
H.323, SIP or All. All means that independent
of the net type the call is accepted on a match
with the predefined Prefix and Suffix.
Prefix.
• Number to which the first part of the
inbound number (bnr) is matched. The prefixis
specified in the dial plan entry. The prefix is
stripped from the inbound number.
Suffix.
• Number to which the last part of the
inbound number (bnr) is matched. The suffix
is specified in the dial plan entry. The suffix
is also stripped from the inbound number.
The part of the number which remains after
stripping both prefix and suffix is called
remainder (See also the “useremainder”
option in a DID service).
Service.
• Select one of the services as
configured in the Services menu item (see the
previous page for more on this).
About Dialplan Configuration
Dialplan DetailsDialplan Configuration Window
In the dialplan: When the Net Type is set to All make sure that the
prefix and/or suffix is a valid H.323 prefix.
Setting it to All means that the prefix will be registered to the
gatekeeper.
Example:
An existing dialplan entry:
name: Test 123
nettype: SIP
prefix: 12@10.47.8.74”
service: FOO
Is changed to:
name: Test 123
nettype: All
prefix: ”12@10.47.8.74”
service: FOO
The H.323 registration will now fail, because”12@10.47.8.84” is not a
valid H.323 prefix