117209-1 A0 1-1
1 Descriptions
BCS II SIMPLEX REPEATER
The Broadband Connectivity System II (BCS II) Simplex Repeater (part
# 710-3201-0002) regenerates DS3, E3, and STS-1 signals to allow in-
creased separation of network elements and provides full DSX function-
ality. The module installs in any vertical BCS II chassis or in the Vector
chassis and is always installed in pairs.
Features
• Full signal regeneration to equal level point on each circuit
• Mini-WECO monitor and I/O jacks
• Alarm and tracer lamp LEDs
• Full DSX functionality, including patching, monitoring and loop-
backs
SPECIFICATIONS
Electrical
Monitor Level: 20 dB + 1.5 dB below signal level
Return Loss: <
-24 dB at DS3 signal rate
Impedance: 75Ω (+/- 5%)
Power
Battery Input: A and B redundant, -42 to -58 Vdc
Input Current: 35 mA nominal @ 48V
Internal Fuse: 1/4 amp, not field replaceable