Filter
Top Products
Teledex IP250D User’s Guide SIP/MGCP Part Number 600-0480-6017
USING THE IP250D
4.13 MAKING CONFERENCE CALLS
During a call, press the CONF key. This will automatically select a new line and place the
original party on hold. Dial the second party; when they are connected, press the CONF
key to add this party to the call. As many people as the system allows may be added to
the call. Once you (as the initator of the conference) drop from the conference, the call is
ended.
4.14 USING THE MSGS KEY
Voice mail should be set up according to instructions from the system the IP250D is
running on. To connect to voice mail, press the MSGS key and follow the voice prompts
or instrcutions provided by your system administrator..
4.15 CHANGING RINGING SOUNDS
To change the volume of the ringer, press the either VOLUME key while on hook. Adjust
to the desired volume setting, and then press the PGM Key to set the volume. The ring
tone can be selected via the SETTINGS menu. Press the SETTINGS key to access the
SETTINGS menu. Follow the sequence: press 1 to enter PHONE SETUP mode; press 2 to
enter RINGER mode; press 1 to enter RINGER TONES, then set the ring tone. Select from
numbers 1 through 8 to choose the desired ring tone.
4.16 CONFIGURING LOCAL SPEED DIAL NUMBERS
To program configurable autodial keys for numbers:
1) Press the PGM key
2) Dial the number you want to store
3) Press the memory dialing key where you want to store the number
4) Press the PGM key again to complete the process.